TOYO-INTL publishes electric hoist models covering different capacities, lifting heights, work classes, electrical supplies, speeds, and control arrangements. The most useful way to compare them is by buying scenario rather than declaring one model universally best.
This list highlights five TOYO-INTL electric hoists whose current product pages provide distinct specification examples. The order is not a best-to-worst performance ranking. Each model is included because its published data may help a buyer build a shortlist for a particular type of requirement.
 |
 |
 |
 |
 |
| DWH | TD | KDB | PA | MNTE |
Five Models at a Glance
| Model | Published specification highlight | Scenario worth reviewing |
| DWH Double Girder Electric Hoist | 1,000-16,000 kg; multiple lift heights; 1Am/M4 to 4m/M7 | Longer-lift and higher work-group configurations |
| TD Electric Hoist | M5; IP55; 4 m lift; multiple speeds and control features | Buyers reviewing an M5 chain-hoist configuration |
| KDB Electric Chain Hoist | 1T-10T; three-phase 220-480 V; trolley data | Broad three-phase chain-hoist configurations |
| PA Electric Hoist | 220/230 V; compact capacity pairs; steel wire rope | Smaller wire-rope lifting requirements |
| MNTE Electric Chain Hoist | 300/500 kg; 220 V; M4; 8 kg published weight | Lightweight single-phase chain-hoist requirements |
1. DWH Double Girder Electric Hoist
The DWH Double Girder Electric Hoist has one of the most extensive published specification tables in TOYO-INTL’s current electric-hoist range.
The table lists capacity configurations from 1,000 kg through 16,000 kg. Many rows show lifting-height options of 6, 9, 12, 15, and 18 m. Selected configurations also show 18, 22, 26, and 30 m. Published paired lifting speeds range from 0.66/4 to 1.6/10 m/min depending on the row, while the table lists 5/20 m/min traveling speed.
The DWH table also publishes FEM/ISO work groups from 1Am/M4 through 4m/M7, depending on the capacity and speed configuration. This is particularly useful for buyers who need to compare work group and lift height together rather than selecting by capacity alone.
The product description mentions a wire rope specified at 2160 MPa tensile strength, a rope guide, Q345 seamless-steel drum, frequency-conversion control box, integrated drives, limit switches, and an intelligent safety monitor that records running and overload time and provides a brake-facing wear alarm.
When to review DWH
DWH is worth reviewing when the inquiry includes a longer lifting height, a multi-ton capacity, a specified FEM/ISO work group, paired lifting speeds, or a double-girder arrangement. Final suitability still depends on the complete application, crane design, runway, power supply, and technical review.
2. TD Electric Hoist
The TD Electric Hoist is a chain-hoist example with M5 published across its displayed specification rows.
The table lists a 4 m lifting height and several capacity configurations. Published lifting-speed examples range from 2.7 to 8 m/min, with a 21 m/min running-speed field. The table also includes hoist power, operating power, rotation speed, phase, voltage, control voltage, and chain diameter.
The product description states IP55 protection and insulation class F. It also mentions stepless speed change, a wireless remote, upper and lower double limit switches, an electromagnetic brake, a 360-degree rotatable forged hook, Grade-7 gear precision, and a G80 nickel-plated chain.
|
 |
| TD Electric Hoist | Wireless remote |
When to review TD
TD is worth reviewing when the buyer is comparing an M5 chain-hoist configuration and wants published information about protection, insulation, speed control, remote operation, and limit functions. The product page’s voltage description and specification table should be reconciled for the selected configuration before quotation.
3. KDB Electric Chain Hoist
The KDB Electric Chain Hoist provides a broad published chain-hoist table with a trolley configuration.
Its main table lists 1T through 10T configurations and a 4 m lifting height. Published load-chain diameters include 7.1, 10.0, and 11.2 mm, while chain-fall arrangements vary by capacity. Lifting-speed examples range from 1.8 to 6.8 m/min.
The main table shows three-phase 220-480 V and 50/60 Hz. It also includes lifting motor power, running motor power, trolley-travel speed, and running motor voltage. These fields make the page useful for buyers who already know the site power supply and need a traveling electric chain hoist.
When to review KDB
KDB is worth reviewing when the requirement involves a three-phase electric chain hoist, a trolley, and a capacity within the published multi-ton configuration range. Buyers should confirm whether the required lift height, beam width, travel arrangement, and work class are available for the proposed model.
4. PA Electric Hoist
The PA Electric Hoist is a smaller wire-rope electric-hoist example using 220/230 V, 50 Hz in its published table.
The table lists capacity pairs from 100/200 kg through 600/1,200 kg, lifting-height pairs of 12/6 m, and lifting-speed pairs of 10/5 m/min. It also includes input power, package dimensions, gross and net weight, and quantity per carton.
The product description identifies an aluminum-alloy casting, copper-wire winding motor, anti-rotation steel wire rope, 360-degree rotating alloy hook, deceleration system, and a limiter that stops operation when the limit baffle reaches the limiter. A separate trolley table publishes capacity, moving speed, voltage, track radius, beam range, track width, and net weight.
When to review PA
PA is worth reviewing for smaller wire-rope lifting requirements where a 220/230 V supply and compact published capacity range are relevant. Buyers should confirm the meaning of the capacity and lift pairs, the required trolley, and the source duty notation before selection.
5. MNTE Electric Chain Hoist
The MNTE Electric Chain Hoist is a lightweight chain-hoist example for buyers comparing lower-capacity configurations.
The page states an 8 kg device weight and lists 300 kg and 500 kg configurations. The displayed lift information is 3 m. Published two-speed examples are 3/9 m/min for the 300 kg configuration and 1.5/4.5 m/min for the 500 kg configuration.
The product page states 220 V power, working level M4, insulation class E, and protection class IP54. It also identifies a permanent-magnet variable-frequency motor.
When to review MNTE
MNTE is worth reviewing when the application requires a lightweight, lower-capacity electric chain hoist using a 220 V supply. Confirm the suspension arrangement, exact lifting height, operating profile, control method, and environmental limits before ordering.
How to Choose Among the Five Models
The five models cover different published specification ranges, so the shortlist should begin with the application.
Start with maximum and typical load. Then define the required vertical lift and available headroom. State how many times the hoist will start or lift per hour, how long it will operate each day, and whether the application needs a normal speed, low positioning speed, dual speed, or variable-speed control.
Next, record the available voltage, phase, and frequency. Identify whether the hoist will be fixed or travel along a beam. If travel is required, provide the beam type, flange width, runway length, curve information, and required travel speed.
Finally, describe the operating environment and required documents. Indoor or outdoor use, dust, humidity, temperature, corrosion, and special hazards should be disclosed. The destination country or region and required manuals, declarations, certificates, or test records should be listed in the inquiry.
A Practical Shortlisting Sequence
- Use capacity and lifting height to remove configurations that do not match the basic requirement.
- Compare the published duty or work-class information against the operating profile.
- Check lifting speed, positioning speed, and trolley-travel requirements.
- Match the model to the available voltage, phase, and frequency.
- Check suspension, beam, runway, headroom, and environmental conditions.
- Ask TOYO-INTL to confirm the final model, configuration, limitations, and documents.
Frequently Asked Questions
Which TOYO-INTL electric hoist is best?
There is no universal best model. DWH, TD, KDB, PA, and MNTE publish different capacity, lift, duty, power, and control information. The appropriate shortlist depends on the application.
Which model publishes the longest lift-height examples in this list?
The current DWH table includes selected configurations with 18, 22, 26, and 30 m lift-height values. Availability must be confirmed for the required capacity and speed configuration.
Which models in this list use 220 V-class power?
The MNTE page states 220 V. The PA table lists 220/230 V, 50 Hz. Exact local supply compatibility should still be confirmed.
Which models publish work-class information?
The models in this list publish different labels: DWH uses paired FEM/ISO groups, TD lists M5, and MNTE states M4. Those labels should not be treated as interchangeable without confirming the applicable classification system.
Is the first model in this article the highest-quality product?
No. The order organizes five buying scenarios and published specification examples. It is not a product-test or overall quality ranking.
Conclusion
DWH, TD, KDB, PA, and MNTE represent five different parts of TOYO-INTL’s electric-hoist range. DWH publishes extensive lift-height and work-group combinations. TD provides an M5 chain-hoist example with multiple control features. KDB offers a broad three-phase chain-hoist table with trolley data. PA covers smaller 220/230 V wire-rope configurations, while MNTE provides a lightweight 220 V chain-hoist example.
Use these product pages to build a shortlist, then provide TOYO-INTL with the complete load, lift, duty, speed, power, installation, environment, destination, and documentation requirements for final confirmation.
